1
/
of
6
DC Audio 3.5k - 3,500w Monoblock Amplifier
DC Audio 3.5k - 3,500w Monoblock Amplifier
Regular price
$1,099.99 USD
Regular price
$1,149.95 USD
Sale price
$1,099.99 USD
Unit price
/
per
Shipping calculated at checkout.
Couldn't load pickup availability
The 3.5kw competition series amplifier is a3,500 watt mono block. It is capable of running up to 18 volts
for up to 5,100 watts. It is alinkable amp and designed to run a 1 ohm per amp or 2 ohms when strapped.
It comes with a bass knob and a clipping indicator. For power inputs it will accept 0 awg for power and
0 awg for ground.
Key Features
1 ohm stable
Variable low pass filter
Variable subsonic filter
Variable bass boost
Wired remote control
Clipping indicator
We recommend for installation
1 upgraded battery under the hood
1 extra battery in the rear
Minimum of one 0 awg ran from the front battery to the rear battery
Upgraded aftermarket alternator
Dash mounted voltage meter
| Features | Voltage | 3.5kw | |
| Output Power (RMS) | 4 ohm | 14.4V | 750W x 1 |
| 2 ohm | 1,800W x 1 | ||
| 1 ohm | 3,500W x 1 | ||
| 1 ohm | 16V | 4,000W x 1 | |
| 1 ohm | 18V | 5,100Wx1 | |
| Input Sensitivity | 6V~0.2V | ||
| Low Pass Filter | Switchable | ||
| ( @ 24 dB Slope) | Variable | Hz | 35~250 |
| Subsonic Filter | Switchable | ||
| ( @ 24dB slope ) | Variable | Hz | 10~50 |
| Bass Boost | Variable | dB | 0-9dB |
| Frequency Response | Hz | 15-270 | |
| Signal to Noise Ratio | dB | 100 | |
| Damping factor | 150< | ||
| Efficiency @ 4ohm | % | Over 90% | |
| THD @ 4ohms | Less than 0.1% | ||
| Fuse Rating | 300 Amps | ||
| Linked Fuse Rating | 600 Amps | ||
| Indicator | Power | Yes | |
| Protection | Yes | ||
| Clip | Yes | ||
| Speaker & Power terminal | Mold Type | Yes | |
| Power | Gauge | 0Ga | |
| Heatsink Length | inch/mm | 21.26"/540mm | |
| Heatsink Width | inch/mm | 9.38"/238mm | |
| Heatsink Height | inch/mm | 2.35"/59.6mm |
Read more
Share
